Skip to content
Necromancer's notes
  • Contact
  • ASUS wl520-gU: RAM upgrade

    17.10.2011 ncrmnt

    I had this router around for quite a long time, but unfortunately it sucked at some points. 1. The clock bug. It’s 200Mhz, not 240, the clock’s off and the result is usb 1.1 hangups. Luckily this is cured by installing a 2.0 hub, to do transaction translation 2. Memory. 16mb is not enough! Especially […]

  • Reverse engineering STC ISP protocol.

    14.10.2011 ncrmnt

    Some time ago, I got myself a bunch of those chips. They were dirt chips, they come from China, they have an 8051 architecture and… They are totally missing a way to get programmed in linux. You can use sdcc, but you are still made to use their binary sh*t to upload the firmware.  And […]

  • Agilia Linux: Немного ABUILD’ов

    08.10.2011 ncrmnt

    Не так давно поставил себе субж. Для начала на дачный воркстейшн потестить. И как это ни странно, он меня порадовал. Шевелится намного быстрее Кубунты, пакетная система достаточно простая… Настолько, что мейнтейнеры даже пакеты не подписывают. Но это, думаю, вскоре поправят. А нет, так начитавшиеся журналом “хакирь” школьники поторопят =) Но вот софта маловато. Ни iverilog’a, […]

  • Using android TTS engine remotely

    06.10.2011 ncrmnt

    Strangely enough, there appeared some good TTS engines for android that don’t make me go nuts. So, instead of building qemu to run my favorite cepstral synth using x86->arm translation, I decided to move on to a different software. Besides, it supports Russian, so I decided to give it a try. Time to recall programming […]

  • WonderMedia WM8650: Adding an uart

    04.10.2011 ncrmnt

    Just received this thingie. I was attracted by the price, availability of kernel sources and the fact I really needed an embedded PC for my needs. Once I got it, the dongle with usb and ethernet caught my attention so I disassembled it. And… what do I see?

  • Using GS6300 charger IC as an adjustable stepdown.

    13.09.2011 ncrmnt

    I got quite a bunch of these thingies some time ago, so it was just the time to get the fun started. At least I needed a car charger for my tablet badly. The wall plug is said to provide 9 volts up to 2,5 Amps. So GS6300 3 Amp thing was just what I […]

  • Laser cut goodies: acrylic test-tube holder

    04.09.2011 ncrmnt

    Well, it really rocks when you have access to a laser cutter and have some spare acrylic. Some time ago I did this test-tube holder I use in my lab. Instead of the actual test-tubes I use bottles from ‘bifidum bacterinum’ I used to take whenever I got my stomach screwed by antibiotics. Therefore, I […]

  • RTL8196 vs OpenWRT

    30.08.2011 ncrmnt

    Okay, I admit it. I screwed up. Bought some ‘edup’ shit to find out the chip was totally unsupported. Well, it caught my attention and I decided to make it supported. Not just because I can’t buy a supported one… It’s just the fun Inside is… RTL8196C. Some time ago I already completed an awesome […]

  • OpenWRT for unbranded-3gn(RT3050F) router (With USB!)

    16.08.2011 ncrmnt

    Okay. As promised, usb support arrived. Thanks to Layne Edwards for his dwc_otg patches – everything now works. Since I have this hardware and I use it, I will be updating a page with firmware builds. So, meet the first version of it and grab on the …. Release notes:   comgt for 3g modems […]

  • A USB flash switcher for my RIGOL DSO

    15.08.2011 ncrmnt

    The good thing of my little Rigol DSO is the USB port, where I can pop the flash and dump data in CSV. However, when you have thrown in some bash/python script to analyze the data, or just want to download the pics, you have to remove the usb flash. In the first case, you […]

Posts pagination

Previous 1 … 12 13 14 … 16 Next

Language

  • English
  • Русский
Necromancer's notes © 2026 Lulz Driven Development Colophon · RSS · Sitemap